KTM F9903RE, Инструкции по установке

Страница: 6 / 22

2 SETUP
4
E00283-10
Warning
Danger of accidents A repaired handlebar poses a
safety risk.
If the handlebar is bent or straightened, the mate-
rial becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged
or bent.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamp. Mount screws
2
but do not
tighten yet.
Marking
A
on the handlebar scale is aligned with the top
edge of the handlebar clamp.
Center line
B
on the handlebar scale is aligned with the
center of the handlebar clamp.
–
First bolt the handlebar clamp with screws
2
onto the longer,
higher side of the handlebar supports so that both parts touch.
–
Tighten screws 2 evenly.
Guideline
Screw, handlebar
clamp M8 20 Nm (14.8 lbf ft)
S01186-10
–
Tighten screws
3
and
4
of the controls.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
Screw, combination
switch, right M5 3.5 Nm
(2.58 lbf ft)
–
Mount right handlebar weight, tighten screw.
Guideline
Screw, handlebar
weight M6 10 Nm (7.4 lbf ft)
–
Check the throttle grip for smooth operation.
E00278-01
–
Mount and tighten the rear mirror on both sides.