KTM F9903RE, Инструкции по установке

Страница: 5 / 22

SETUP 2
3
2.1 Unpacking and setting up the vehicle
Preparatory work
–
Remove the box.
S01182-01
Main work
–
Remove the adhesive tape in the upper area of the motorcycle.
S01183-01
–
Roll down the film at the sides.
Info
To avoid damaging the motorcycle during unpacking,
leave the other films on the vehicle until you have fin-
ished work on the vehicle.
–
Remove the separate enclosure and unpack it. Check the sepa-
rate enclosure for completeness.
–
Check the vehicle for transport damage.
S01184-01
–
Remove the controls from the transport holder. Remove the
screws of the handlebar clamp. Take off the handlebar clamp
and transport holder.
S01185-10
–
Remove right-hand handlebar weight
1
.
–
Position the controls on the right half of the handlebar but do
not tighten yet.