KTM F9903RE, Инструкции по установке

Страница: 10 / 22

3 WORK
8
3.4 Mounting the front rider's seat
401921-10
Main work
–
Attach recesses 1 on the front rider's seat to the fuel tank,
push the front rider's seat forward.
–
Position locking pin
2
in the lock housing and push down
the front rider's seat at the rear.
The locking pin engages with an audible click.
–
Check that the front rider's seat is mounted correctly.
Finishing work
–
Mount the passenger seat. ( p. 7)
3.5 Adjusting the steering angle
F01228-10
–
Loosen nuts
1
.
–
Make sure that sufficient steering angle remains after finishing
the work.
Info
Do not unscrew screws fully.
The screw must be screwed in by at least five full turns.
–
Adjust the steering angle by turning adjusting screws
2
left
and right.
Guideline
Minimum spacing between
the mirror bar and wind-
shield 9 mm (0.35 in)
Turn the adjusting screws 2 so that the left and right
steering angle settings are equal
–
Tighten nuts
1
.
Guideline
Remaining nuts,
chassis M8 25 Nm (18.4 lbf ft)
–
Make sure that there is sufficient space between the controls
and fuel tank when the handlebar has been driven in fully after
completing the work.