2
SETUP
5
S00801-10
–
Recharge the battery. (
–
Install the battery. (
–
Plug in connector
on the starter relay.
S00802-10
–
Remove the rear fairing. (
–
Four markings
are found on the underside of the rear fairing. At these location,
drill holes to the specified diameter in three stages.
Guideline
Hole diameter for grab handles
14.5 mm (0.571 in)
S00803-10
–
Remove screws
.
–
Fit the rear fairing. (
201901-10
–
Mount the reflector.
Operation as a 2-seater
–
Mount rear footrest bracket. (
Operation as a 1-seater (only if requested by customer)
Warning
Forfeiture of homologation and insurance cover
The vehicle is
homologated as 2-seater. If the heel protector is fitted instead of the
footrest bracket, the vehicle no longer conforms to the homologation and
must not be operated in this form without alterations to the registration
papers.
–
Set up and operate the vehicle as a 2-seater or have changes made
to the registration papers.
–
Mount heel protector. (
–
Refuel. (
–
Prepare the vehicle according to the specifications in the
KTM Dealer.net
for han-
dover to the customer.
–
Set the kilometers or miles. (
Содержание 690 SMC R 2016 Series
Страница 1: ...SETUP INSTRUCTIONS 2016 690 SMC R Art no 3213429en ...
Страница 2: ......