KTM 690 SMC R 2016 Series, Инструкции по установке

Страница: 6 / 18

2 SETUP
4
S00797-10
–
Position the handlebar.
–
Position the handlebar clamps. Mount the four screws and tighten evenly.
Guideline
Screw, handlebar clamp M8 20 Nm
(14.8 lbf ft)
The markings  of the handlebar scale are located centrally between the han-
dlebar clamps.
Markings

face backwards.
S00798-10
–
Position the controls on the left half of the handlebar.
–
Mount the screws.
S00799-10
–
Position all controls in their exact positions on the handlebar.
–
Tighten screws

and

.
Guideline
Screw, throttle grip M5 3.5 Nm
(2.58 lbf ft)
Screw, brake assembly M6 5 Nm (3.7 lbf ft)
–
Check the throttle grip for smooth operation.
–
Mount and tighten the screw of the right hand guard.
–
Tighten screws

and

.
Guideline
Screw, combination switch, left M5 3.5 Nm
(2.58 lbf ft)
Screw, clutch assembly M6 5 Nm (3.7 lbf ft)
K00062-01
–
Mount and tighten the rear mirror adapter and rear mirror on both sides.
100308-01
–
Mount the footrests with springs and pins. Secure the pins using washers and cot-
ter pins.
Pliers for footrest spring (58429083000)
–
Remove the protective plastic.
–
Carefully loosen and remove the tension belt over the link fork.
Info
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tension belts around the lower triple clamp.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off the palette.