3
WORK
6
3.1
Removing the seat
101977-10
–
Pull on strap
and raise the rear of the seat at the same time.
–
Pull back the seat and lift it off.
3.2
Mounting the seat
101988-10
–
Hook slot
of the seat onto screw
, press the rear downward and at the same time push it forward.
–
Push locking pin
into lock housing
and push the back of the seat down until the locking pin locks in place with an audible
click.
–
Check, finally, that the seat is correctly mounted.
3.3
Removing the battery
Warning
Risk of injury
Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks and open flames away from the battery. Only charge in well-ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least
15 minutes and contact a physician.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. (
B01974-10
Main work
–
Remove battery cover
.
–
Pull the EFI control unit
off of the holder and set it to one side.
Содержание 690 SMC R 2016 Series
Страница 1: ...SETUP INSTRUCTIONS 2016 690 SMC R Art no 3213429en ...
Страница 2: ......