KTM 690 LC4 2007, Руководство по ремонту

Страница: 29 / 95

– Turn the freewheel gear
1
in a counterclockwise direction and
remove the primary pinion.
Removing the starter drive
– Remove the lock rings
2
with the washers mounted underneath.
– Pull off both starter drive idler gears; remove the needle bearings.
– Take the freewheel gear
3
off the crankshaft and remove the
woodruff key
4
.
– Remove both needle bearings
5
.
Disassembling the shift mechanism
– Push the shift rail
6
away from the shift lock
7
and pull out the
shift shaft
8
together with the washer mounted underneath.
– Remove the screw
9
(AH 5 mm) on the shift lock.
– Press the locking lever
bk
down to relieve the shift lock
7
, remove
the shift lock.
– Loosen the screw and remove the locking lever together with the
washer and spring.
4-10
Repair manual KTM 690 LC4
Art.-No. 3.206.045-E
1
2
2
3
4
5
6
7
8
9
bk
7