KTM 690 LC4 2007, Руководство по ремонту

Страница: 21 / 95

Preparatory work
– Thoroughly clean the outside of the engine.
– Drain the engine oil.
– Clamp the engine in the engine work stand 560.12.001.000 with
holders 750.12.001.060 and 750.12.001.070.
Left side of the engine
– Remove both screws
1
on the starter engine and dismount the
starter engine.
– Remove the valve cover screws and lift off the valve cover.
– Remove the screws on the generator cover
2
and lift off the
generator cover. Pull out the centering sleeves, remove and discard
the gasket.
– Remove the gear sensor
3
.
– Remove both contact bolts
4
and the O-ring
5
.
– Take both contact springs
6
out of the bores.
4-2
Repair manual KTM 690 LC4
Art.-No. 3.206.045-E
1
2
3
4
4
5
6