KTM 690 LC4 2007, Руководство по ремонту

Страница: 23 / 95

– Remove the gasket and discard.
– Loosen the screw on the water pump wheel
1
and remove.
– Remove the water pump wheel.
– Take the washer
2
off the water pump shaft.
– Remove the screws and take off the clutch cover
3
, discard the
gasket and pull out the centering sleeves.
– Unscrew the temperature sensor
4
(A/F 19 mm) and spark plug
5
(750.29.172.000).
Moving the engine to TDC
– Remove the plug
6
.
– Turn the crankshaft in a counterclockwise direction until the mark
on the camshaft
7
is in alignment with the mark on the camshaft
retaining bracket.
NOTE: the mark on the camshaft retaining bracket is in the middle of
the screw
8
.
– Screw on the engine locking screw 773.29.010.000, make sure the
engine is locked.
! CAUTION !
D
O NOT USE THE LOCKING SCREW TO HOLD THE CRANKSHAFT WHEN YOU UNSCREW
OR TIGHTEN THE NUTS ON THE FLYWHEEL OR PRIMARY PINION SINCE ENGINE PARTS
WILL BE DAMAGED
.
4-4
Repair manual KTM 690 LC4
Art.-No. 3.206.045-E
1
2
3
4
5
6
7
8
9