KTM 690 DUKE R AUS/UK Скачать руководство пользователя страница 84 | Manualshive

Страница: 84 / 187

KTM 690 DUKE R AUS/UK Скачать руководство пользователя страница 84

BRAKES

82

Note

Danger of accidents

Reduced braking efficiency caused by damaged brake discs.

–

If the brake linings are not changed in time, the steel brake lining carriers grind on the brake disc. The braking effect is greatly
reduced and the brake discs are rendered unserviceable. Check the brake linings regularly.

100137-10

–

Check the brake linings for minimum thickness



.

Minimum thickness



≥

1 mm (

≥

0.04 in)

» If the minimum thickness is less than specified:

–

Change the front brake linings.

x

–

Check the brake linings for damage and cracking.
» If there is wear or tearing:

–

Change the front brake linings.

x

11.6

Checking the free travel of foot brake lever

Warning

Danger of accidents

Brake system failure.

–

If there is no free travel on the foot brake lever, pressure builds up on the rear brake circuit. The rear brake can fail due to over-
heating. Adjust free travel on foot brake lever according to specifications.

«
...
82
83
84
85
86
...
»

Содержание 690 DUKE R AUS/UK




























































































































































































Отзывы:

Нет отзывов