KTM 660 SMC SUPERMOTO 2003, Дополнение к руководству пользователя

Страница: 26 / 32

ENGLISH
26
Collar nut front axle M24x1,5 40 Nm (30ft.lb)
Collar nut rear axle M20x1,5 80 Nm (59ft.lb)
Shock absorber top M10 (10.9) 45 Nm (33ft.lb)
Shock absorber bottom M10 (10.9) 45 Nm (33ft.lb)
Collar screws brake disks M6 (10.9) Loctite 243 + 10Nm (7ft.lb)
Screws brake caliper support front M8 Loctite 243 + 25 Nm (19ft.lb)
Screws brake caliper front M10 Loctite 243 + 45 Nm (33ft.lb)
Bearing bolt linkage arm/frame M12 60 Nm (44ft.lb)
Collar nuts rocker arm bolts M14x1,5 100 Nm (74ft.lb)
Engine mounting screw M10 45 Nm (33ft.lb)
Ball joint for push rod foot brake cylinder M8 Loctite 243 + 25 Nm (19ft.lb)
Sprocket screws on nuts M8 Loctite 243 + 35 Nm (25ft.lb)
Collar nut swingarm bolt M14x1,5 100 Nm (74ft.lb)
Clamping screws fork legs top triple clamp M8 10 Nm (7ft.lb)
Clamping screws steering stem top triple clamp M8 20 Nm (15ft.lb)
Clamping screws fork legs bottom triple clamp M8 10 Nm (7ft.lb)
Clamping screws steering stem bottom triple clamp M8 20 Nm (15ft.lb)
Clamping screws fork stubs M8 10 Nm (7ft.lb)
Collar screw steering head M20x1,5 40 Nm (30ft.lb)
Screws handlebar clamp M8 20 Nm (15ft.lb)
Allan head screw handle bar support M10 Loctite 243 + 40 Nm (30ft.lb)
Spoke nipple M4 4 Nm (3ft.lb)
Other screws/collar nuts on chassis M6 10 Nm/15 Nm (7ft.lb)/(11ft.lb)
M8 25 Nm/30 Nm (19ft.lb)/(22ft.lb)
M10 45 Nm/50 Nm (33ft.lb)/(37ft.lb)
TIGHTENING TORQUES - CHASSIS 660 SUPERMOTO FACTORY REPLICA 2003
Frame Central chrome-moly-steel frame
Fork W hite P ower Up Side Down 48
Wheel travel front/rear 270 / 290 mm
Rear suspension Central shock absorber (WP) with PRO-LEVER linkage to rear- swing-arm with needle bearing
Front brake Disc brake with floating brake disc, 4-piston brake caliper
Front brake disc Ø 320 mm
Rear brake Disc brake,l brake disc 220 mm, brake caliper floated
Tyres front 120/60-17
Air pressure 1,4 – 1,8 bar
Tyres rear 165/55-17
Air press. road 1,4 – 1,7 bar
Fuel tank capacity 5,5 liter
Final drive ratio 16:40 t
Chain 5/8 x 1/4"
Steering angle 63,5°
Wheel base 1510 ± 10 mm
Seat high 915 mm ± 8 mm
Ground clearance 290 mm
Dead weight without fuel 114 kg
TECHNICAL SPECIFICATIONS - CHASSIS 660 SUPERMOTO FACTORY REPLICA 2003
WP4860MXMA
1418X731
Compression adjuster 15
Rebound adjuster 15
Spring 4,6 N/mm
Spring preload 5 mm
Air chamber length 100 mm
Fork oil SAE 5
STANDARD ADJUSTMENT - FORK
WP5018MX-DCC
1218X763
Compression adjuster 12 LS (low speed)
1,5 HS (high speed)
Rebound adjuster 15
Spring 70 / 200
Spring preload 8,5 mm
STANDARD-ADJUSTMENT - SHOCK ABSORBER