KTM 500 EXC SIX DAYS US, Руководство пользователя

Страница: 58 / 132

12 SERVICE WORK ON THE CHASSIS
56
K00140-10
–
Position the upper triple clamp with the handlebar.
–
Mount screw

but do not tighten yet.
–
Position the clutch line, wiring harness, and voltage regulator. Mount and tighten
screws
 .
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
K00145-10
–
Position the fork legs.
Bleeder screws

are positioned toward the front.
Info
Grooves are milled into the side of the upper end of the fork legs. The sec-
ond milled groove (from the top) must be flush with the top edge of the
upper triple clamp.
K00141-10
–
Tighten screws

.
Guideline
Screw, bottom triple clamp M8 15 Nm
(11.1 lbf ft)
K00142-10
–
Tighten screw

.
Guideline
Screw, top steering head M20x1.5 12 Nm (8.9 lbf ft)
K00142-11
–
Tighten screw  .
Guideline
Screw, top steering stem M8 20 Nm
(14.8 lbf ft)
K00141-11
–
Tighten screws  .
Guideline
Screw, top triple clamp M8 20 Nm
(14.8 lbf ft)
–
Secure the wiring harness with cable holder

.