KTM 500 EXC SIX DAYS US, Руководство пользователя

Страница: 62 / 132

12 SERVICE WORK ON THE CHASSIS
60
Guideline
Screw, top triple clamp M8 20 Nm
(14.8 lbf ft)
–
Tighten screw  .
Guideline
Screw, top steering stem M8 20 Nm
(14.8 lbf ft)
Finishing work
–
Check the steering head bearing play. ( p. 59)
–
Remove the motorcycle from the lift stand. ( p. 51)
12.15 Adjusting the play of the steering head bearing (EXC Six Days US)
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 51)
M00140-10
Main work
–
Release screws

. Remove screw

.
–
Loosen and retighten screw

.
Guideline
Screw, top steering head M20x1.5 12 Nm (8.9 lbf ft)
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
–
Tighten screws

.
Guideline
Screw, top triple clamp M8 17 Nm
(12.5 lbf ft)
–
Mount and tighten screw  .
Guideline
Screw, top steering stem M8 17 Nm
(12.5 lbf ft) Loctite ® 243™
Finishing work
–
Check the steering head bearing play. ( p. 59)
–
Remove the motorcycle from the lift stand. ( p. 51)
12.16 Greasing the steering head bearing
800010-10
(EXC Six Days US)
–
Remove the lower triple clamp. ( p. 55)
–
Install the lower triple clamp. ( p. 57)
(EXC US)
–
Remove the lower triple clamp. ( p. 54)
–
Install the lower triple clamp. ( p. 55)
12.17 Removing the front fender
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 94)
K00072-10
Main work
–
Remove screws

.