KTM 400-660 LC4 1998-2005, Руководство по ремонту

Страница: 90 / 501

– Insert shift roller
1
into the housing with the holder for the locking
piece facing up.
– Hook the shift forks into the shift roller and mount shift rails 2 + 3 .
The shorter shift rail
3
must be fitted to the main shaft.
– Before mounting the shift mechanism support, check whether the
two dowels have been fitted.
– Mount shift mechanism support, secure the two bolts
4
with Loctite
243 and tighten.
– Put the washer (6.2x18x2 mm), the locking lever, the locking spring
bushing and the locking lever spring onto the third bolt.
– Apply Loctite 243 to the thread of the bolt and mount it.
– Pull locking lever
5
away from the shift roller.
– Put the shift drum locating device
6
onto the shift roller, apply
Loctite 243 to the thread of the bolt and fix the shift drum locating
device.
– Oil the O-rings and grease the shank of the shift shaft.
– Slide preassembled shift shaft into kickstarter shaft.
– At the same time, push back the slide plate
7 and make sure that
the ends of the return spring
9
are resting against the centering cup
of the shift mechanism support
8
.
6-3E
1
2
3
4
4
5
6
7
8
9