KTM 400-660 LC4 1998-2005, Руководство по ремонту

Страница: 227 / 501

10-2E
Repair manual KTM LC4
Art.-Nr
. 3.206.014 -E
Dismounting/mounting the rocker arm and shock absorber
– Jack up the motorcycle (place on a firm and even surface), unscrew
and remove the two nuts
1
,
2
and the shock absorber screw
3
on
the rocker arm
4
.
– Slightly lift the rear wheel and pull out the bolt
1
.
– Remove the nut from the
5
and take off the right linkage arm
6
.
!
CAUTION
!
– P
ULL THE LINKAGE ARM OFF BOTH BOLTS EVENLY BY HAND TO PREVENT IT FROM
CANTING
.
– S
UPPORT THE REAR WHEEL TO MAKE IT EASIER TO DISMOUNT
.
– Pull the rocker arm
4
out of the swinging fork attachment
7
and
remove.
– Remove the brake fluid reservoir for the rear brake cylinder and tilt
aside.
– Raise the rear wheel approx. 15 cm by placing it on a suitable object.
– Hold the shock absorber and remove the screw
8
on the upper
shock absorber mount.
– Remove the shock absorber
9
by pulling it down through the
swinging fork.
Use the same procedure in reverse to mount the shock absorber and
rocker arm.
TORQUES:
– Upper and lower shock absorber screw: 45 Nm
– Collar nut for the bearing bolt between the linkage arm and the
frame: 60 Nm
– Collar nuts for the rocker arm bolts: 100 Nm
4
5
3
6
7
8
1
2
4
9