KTM 390 Duke AR 2019 Скачать руководство пользователя страница 91

Страница: 91 / 257

PREPARING FOR USE 8

8.2

Running in the engine

–

During the running-in phase, do not exceed the specified engine speed.
Guideline

Maximum engine speed

During the first: 1,000 km (620 mi)

7,500 rpm

Info

During the running-in phase, the shift warning light is set to a specified value and cannot be changed.

–

Avoid fully opening the throttle!

8.3

Loading the vehicle

Warning

Danger of accidents

Total weight and axle loads influence the handling characteristic.

The total weight consists of: motorcycle ready for operation and with a full tank, driver and passenger
with protective clothing and helmet, and luggage.

–

Do not exceed the maximum permissible overall weight or the axle loads.

Содержание 390 Duke AR 2019


































































































































































































































































Результаты поиска

Содержание 390 Duke AR 2019

Отзывы:

KTM 390 Duke AR 2019, Руководство пользователя, Страница: 91 / 257

Результаты поиска

Содержание 390 Duke AR 2019

Отзывы: