KTM 390 Duke AR 2019 Скачать руководство пользователя страница 105

Страница: 105 / 257

RIDING INSTRUCTIONS 9

103

9.6

Stopping, parking

Warning

Risk of injury

People who act without authorization endanger themselves and others.

–

Do not leave the vehicle unattended if the engine is running.

–

Protect the vehicle against access by unauthorized persons.

–

Lock the steering and remove the ignition key if you leave the vehicle unattended.

Warning

Danger of burns

Some vehicle components become very hot when the vehicle is operated.

–

Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake system
before the vehicle parts have cooled down.

–

Let the vehicle parts cool down before you perform any work on the vehicle.

Note

Material damage

The vehicle may be damaged by incorrect procedure when parking.

Significant damage may be caused if the vehicle rolls away or falls over.
The components for parking the vehicle are designed only for the weight of the vehicle.

–

Park the vehicle on a firm and level surface.

–

Ensure that nobody sits on the vehicle when the vehicle is parked on a stand.

Содержание 390 Duke AR 2019


































































































































































































































































Результаты поиска

Содержание 390 Duke AR 2019

Отзывы:

KTM 390 Duke AR 2019, Руководство пользователя, Страница: 105 / 257

Результаты поиска

Содержание 390 Duke AR 2019

Отзывы: