KTM 390 Duke AR 2019 Скачать руководство пользователя страница 102

Страница: 102 / 257

9 RIDING INSTRUCTIONS

100

–

If the engine stalls (e.g. at a crossroads), just pull the clutch
lever and press the electric starter button. You do not have to
shift into neutral.

–

If the oil pressure warning lamp

lights up during a trip, stop

immediately and switch off the engine. Contact an authorized
KTM workshop.

–

If the malfunction indicator lamp

lights up during a trip,

please contact an authorized KTM workshop as soon as possi-
ble.

–

If the general warning lamp

lights up during a trip, an oper-

ating safety (warning) message was detected.

Info

All warnings which have occurred are displayed and
stored in the

Warning

menu until these are no longer

active.

9.5

Applying the brakes

Warning

Danger of accidents

Moisture and dirt impair the brake system.

–

Brake carefully several times to dry out and remove dirt from the brake linings and the brake discs.

Содержание 390 Duke AR 2019


































































































































































































































































Результаты поиска

Содержание 390 Duke AR 2019

Отзывы:

KTM 390 Duke AR 2019, Руководство пользователя, Страница: 102 / 257

Результаты поиска

Содержание 390 Duke AR 2019

Отзывы: