KTM 390 Duke AR 2019 Скачать руководство пользователя страница 159

Страница: 159 / 257

WHEELS, TIRES 14

157

F00863-11

–

Clean the thread of the wheel spindle and screw

–

Clean and grease the wheel spindle.

Long-life grease (

p. 242)

–

Position the front wheel and insert the wheel spindle.

The brake linings are correctly positioned.

–

Mount and tighten screw

Guideline

Screw, front wheel
spindle

25 Nm (18.4 lbf ft)

–

Position wheel speed sensor

in the hole.

–

Mount and tighten screw

Guideline

Screw, wheel speed
sensor holder

8 Nm (5.9 lbf ft)

–

Mount and tighten screws

with the washers.

Guideline

Screw, front fender

7 Nm (5.2 lbf ft)

–

Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.

–

Take the motorcycle off the front lifting gear. (

p. 119)

Содержание 390 Duke AR 2019


































































































































































































































































Результаты поиска

Содержание 390 Duke AR 2019

Отзывы:

KTM 390 Duke AR 2019, Руководство пользователя, Страница: 159 / 257

Результаты поиска

Содержание 390 Duke AR 2019

Отзывы: