KTM 390 Duke AR 2019 Скачать руководство пользователя страница 167

Страница: 167 / 257

WHEELS, TIRES 14

165

–

Remove the rear of the motorcycle from the lifting gear.
(

p. 116)

–

Check the chain tension. (

p. 127)

14.6

Checking the tire condition

Warning

Danger of accidents

If a tire bursts while riding, the vehicle becomes uncontrollable.

–

Ensure that damaged or worn tires are replaced immediately. (Your authorized KTM workshop will be
glad to help.)

Warning

Danger of crashing

Different tire tread patterns on the front and rear wheel impair the handling charac-

teristic.
Different tire tread patterns can make the vehicle significantly more difficult to control.

–

Make sure that only tires with a similar tire tread pattern are fitted to the front and rear wheel.

Warning

Danger of accidents

Non-approved or non-recommended tires and wheels impact the handling character-

istic.

–

Only use tires/wheels approved by KTM with the corresponding speed index.

Содержание 390 Duke AR 2019


































































































































































































































































Результаты поиска

Содержание 390 Duke AR 2019

Отзывы:

KTM 390 Duke AR 2019, Руководство пользователя, Страница: 167 / 257

Результаты поиска

Содержание 390 Duke AR 2019

Отзывы: