KTM 390 Duke 2014 COL 2013, Руководство по ремонту

Страница: 156 / 204

19 LUBRICATION SYSTEM
154
19.4 Changing the engine oil and oil filter, cleaning the oil screen
Warning
Danger of scalding Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Drain the engine oil only when the engine is warm.
Preparatory work
–
Remove the front spoiler. ( p. 47)
–
Stand the motorcycle on its side stand on a horizontal surface.
101917-10
Main work
–
Place a suitable container under the engine.
–
Remove the oil drain plug
1
with the O-ring.
–
Remove oil screen
2
with the O-ring.
–
Remove screw plug
3
with oil screen
4
.
–
Completely drain the engine oil.
–
Thoroughly clean the oil drain plugs and oil screens.
–
Position oil screen
2
and mount and tighten oil drain plug
1
with the O-ring.
Guideline
Oil drain plug M24x1.5 15 Nm
(11.1 lbf ft)
–
Mount and tighten screw plug
3
with oil screen
4
and the O-ring.
Guideline
Oil screen screw plug, small M17x1.5 12 Nm (8.9 lbf ft)
101918-10
–
Remove screws
5
. Remove the oil filter cover
6
with the O-ring.
–
Pull oil filter
7
out of the oil filter housing.
Circlip pliers reverse (51012011000) ( p. 189)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing area.
101919-10
–
Insert oil filter
7
.
–
Oil the O-ring of the oil filter cover. Mount oil filter cover
6
.
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover M5 8 Nm (5.9 lbf ft)
Info
Too little engine oil or poor-quality engine oil results in premature wear to
the engine.