KTM 390 Duke 2014 COL 2013, Руководство по ремонту

Страница: 140 / 204

16 ENGINE
138
308000-11
–
Mount the water pump cover with the seal ring.
–
Mount screws
4
and tighten them in a crisscross pattern.
Guideline
Screw, water pump cover M6 12 Nm (8.9 lbf ft)
16.5.23 Installing the timing chain
307999-11
–
Feed in the timing chain tensioning rail from above.
–
Mount and tighten screw
1
.
Guideline
Screw, timing chain ten-
sioning rail M6 12 Nm
(8.9 lbf ft) Loctite ® 243™
307998-11
–
Position timing chain
2
in the engine case according to the direction of travel.
16.5.24 Installing the starter motor
307997-10
–
Grease the O-ring. Position the starter motor.
Long-life grease ( p. 187)
–
Mount and tighten screws
1
.
Guideline
Screw, starter motor M6 12 Nm (8.9 lbf ft)
16.5.25 Installing the piston
307992-10
–
Shift the joint of the piston rings by 120°.
–
Place the special tool onto the oiled piston. Clamp the piston rings together using
the special tool.
Piston ring mounting tool (60029015000) ( p. 190)
The piston ring are squeezed together fully.