KTM 390 Duke 2014 COL 2013, Руководство по ремонту

Страница: 142 / 204

16 ENGINE
140
307996-10
–
Cover the engine case opening with a cloth.
–
Position piston ring lock
4
.
6-o'clock position.
–
Insert the special tool and firmly press it toward the piston.
Insert for piston pin retainer (77329030100) ( p. 193)
–
Turn the special tool clockwise, thereby pressing the piston pin retainer into the
groove.
–
Make sure that the piston pin retainer is seated correctly on both sides.
–
Remove the cloth.
–
Keep the timing chain tensioned. Push the cylinder down carefully and let the dow-
els engage.
16.5.26 Installing the cylinder head
307989-10
–
Position timing chain guide rail
1
.
Pins
A
engage in recess
B
.
The timing chain guide rail engages in recess
C
.
307987-11
–
Mount dowels
2
.
–
Put on cylinder head gasket
3
.
–
Mount the cylinder head.
307986-11
–
Mount screws
4
with the washer and tighten in a crisscross pattern.
Guideline
Screw, cylinder head M10 1st stage
30 Nm
(22.1 lbf ft)
2nd stage
60 Nm
(44.3 lbf ft) Thread is oiled,
head flat is
greased