11
SERVICE WORK ON THE CHASSIS
63
M00785-10
–
Fill bleeding syringe
with the appropriate hydraulic fluid.
Bleed syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
Remove bleeder screw
.
–
Mount bleeding syringe
on the clutch slave cylinder.
Info
Clean up overflowed or spilt brake fluid immediately with water!
Avoid contact between brake fluid and painted parts. Brake fluid attacks
paint!
Use only clean brake fluid from a sealed container!
102197-10
–
Inject the liquid into the system until it escapes from drill hole
of the master
cylinder without bubbles.
–
Drain fluid occasionally from the master cylinder reservoir, to prevent overflow.
–
Remove the bleeding syringe. Mount and tighten screws bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim
4 mm (0.16 in)
–
Position the cover with the membrane. Mount and tighten the screws.