KTM 2015 450 SC-F USA Скачать руководство пользователя | Manualshive

Страница: 75 / 105

background image

15

COOLING SYSTEM

73

15.1

Cooling system

G01631-10

Water pump



in the engine circulates the coolant.

The pressure resulting from the warming of the cooling system is regulated by a valve
in radiator cap



. This ensures that operating the vehicle at the specified coolant

temperature will not result in a risk of malfunctions.

120 °C (248 °F)

Cooling is effected by the air stream.
The lower the speed, the less the cooling effect. Dirty cooling fins also reduce the cool-
ing effect.

15.2

Checking the antifreeze and coolant level

Warning

Danger of scalding

During motorcycle operation, the coolant gets very hot and is under pressure.

–

Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the
engine and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.

Warning

Danger of poisoning

Coolant is poisonous and a health hazard.

–

Coolant must not come into contact with the skin, eyes, or clothing. If contact occurs with the eyes, rinse with water imme-
diately and contact a physician. Immediately clean contaminated areas on the skin with soap and water. If coolant is swal-
lowed, contact a physician immediately. Change clothing that is contaminated with coolant. Keep coolant out of reach of
children.

Condition

The engine is cold.

400243-10

–

Stand the motorcycle upright on a horizontal surface.

–

Remove the radiator cap.

–

Check antifreeze of coolant.

−

25…

−

45 °C (

−

13…

−

49 °F)

» If the antifreeze of the coolant does not meet specifications:

–

Correct the antifreeze of the coolant.

–

Check the coolant level in the radiator.

Coolant level



above radiator fins.

10 mm (0.39 in)

» If the coolant level does not meet specifications:

–

Correct the coolant level.

Alternative 1

Coolant (

Alternative 2

Coolant (mixed ready to use) (

–

Mount the radiator cap.

15.3

Checking the coolant level

Warning

Danger of scalding

During motorcycle operation, the coolant gets very hot and is under pressure.

–

Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the
engine and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.

Warning

Danger of poisoning

Coolant is poisonous and a health hazard.

–

Coolant must not come into contact with the skin, eyes, or clothing. If contact occurs with the eyes, rinse with water imme-
diately and contact a physician. Immediately clean contaminated areas on the skin with soap and water. If coolant is swal-
lowed, contact a physician immediately. Change clothing that is contaminated with coolant. Keep coolant out of reach of
children.

«
...
73
74
75
76
77
...
»

Содержание 2015 450 SC-F USA










































































































Отзывы:

Нет отзывов

Похожие инструкции для 2015 450 SC-F USA

Бренд: Öhlins Страницы: 8

Бренд: R&G Страницы: 13

Бренд: GAS GAS Страницы: 72

TXT PRO - PART LIST 2010

Бренд: GAS GAS Страницы: 64

Бренд: R&G Страницы: 14

2001 GSX1300RK1 HAYABUSA

Бренд: Suzuki Страницы: 31

ZTechnik VStream Z2392

Бренд: National Cycle Страницы: 2

PowerCom INNOVA Plus Business

Бренд: AKE Страницы: 2

Бренд: PUIG Страницы: 6

Бренд: DYNATEK Страницы: 12

Бренд: Saddlemen Страницы: 6

Бренд: Mastech Страницы: 2

Бренд: VESPA Страницы: 80

TERMOSCUD-R204X

Бренд: tucanourbano Страницы: 2

TERMOSCUD R200X

Бренд: tucanourbano Страницы: 4

TERMOSCUD R192X

Бренд: tucanourbano Страницы: 4

Siegen Tools S01001.V3

Бренд: Sealey Страницы: 4

Бренд: REV'IT Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды