SERVICE WORK ON THE CHASSIS
51
10.19
Removing the shock absorber
x
–
Raise the motorcycle with the lift stand. (
101444-10
–
Remove screw
and lower the rear wheel with the swing arm as far as possible
without blocking the rear wheel. Fix the rear wheel in this position.
–
Remove screw
, push splash protector
to the side, and remove the shock
absorber.
10.20
Installing the shock absorber
x
101444-11
–
Push splash protector
to the side and position the shock absorber. Mount and
tighten screw
.
Guideline
Screw, top shock absorber
M12
80 Nm
(59 lbf ft)
Loctite
®
2701
–
Mount and tighten screw
.
Guideline
Screw, bottom shock
absorber
M12
80 Nm
(59 lbf ft)
Loctite
®
2701
Info
The heim joint for the shock absorber at the swing arm is Teflon coated. It
must not be greased with grease or with other lubricants. Lubricants dis-
solve the Teflon coating, thereby drastically reducing the service life.
–
Remove the motorcycle from the lift stand. (
10.21
Removing the front fender
101345-10
–
Remove screws
. Remove the front fender.
–
Make sure the spacers remain in place.
10.22
Installing the front fender
101345-10
–
Ensure that the spacers are mounted in the fender.
–
Position the front fender. Mount and tighten screws
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
Info
Make sure the holding lugs engage in the start number plate or headlight
mask.
Содержание 2012 250 EXC-F SIX DAYS
Страница 1: ...OWNER S MANUAL 2012 250 EXC F EU 250 EXC F AUS 250 EXC F SIX DAYS EU 250 XCF W USA Art no 3211719en ...
Страница 2: ......
Страница 80: ...WHEELS TIRES 78 Torque wrench with various accessories in set 58429094000 ...
Страница 120: ... 3211719en 3211719en KTM Sportmotorcycle AG 5230 Mattighofen Austria http www ktm com 05 2011 Photo Mitterbauer ...