KTM 2012 250 EXC-F SIX DAYS, Руководство пользователя

Страница: 21 / 120

CONTROLS
19
5.31
Display mode SPEED/A1 (average speed 1)
400325-01
–
Press the button briefly and repeatedly until
A1
appears at the top right of the
display.
A1
(average speed 1) shows the average speed calculated on the basis of
TR1
(trip mas-
ter 1) and S1 (stop watch 1).
The calculation of this value is activated by the first impulse of the wheel speed sensor
and ends 3 seconds after the last impulse.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
The
TR1
,
A1
and
S1
displays are reset to 0.0.
Press the button
briefly. Next display mode
5.32
Display mode SPEED/A2 (average speed 2)
400326-01
–
Press the button briefly and repeatedly until A2 appears at the top right of the
display.
A2 (average speed 2) shows the average speed on the basis of the current speed if the
stop watch S2 (stop watch 2) is running.
Info
The displayed value can differ from the actual average speed if
S2
was not
timed after the ride.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
–
Press the button
briefly. Next display mode
5.33
Display mode SPEED/S1 (stop watch 1)
400327-01
–
Press the button briefly and repeatedly until
S1
appears at the top right of the
display.
S1 (stop watch 1) displays the journey time on the basis of TR1 and continues when an
impulse is received from the wheel speed sensor.
The calculation of this value starts with the first impulse of the wheel speed sensor and
ends 3 seconds after the last impulse.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
Displays of
TR1
,
A1
and
S1
are reset to 0.0.
Press the button
briefly. Next display mode
5.34
Display mode SPEED/S2 (stop watch 2)
400328-01
–
Press the button briefly and repeatedly until S2 appears at the top right of the
display.
S2 (stop watch 2) is a manual stop watch.
If S2 is running in the background, the S2 display flashes in the speedometer display.
Press the button . Starts or stops S2 .
Press the button . No function
Press the button
for 3 - 5 seconds.
Displays of S2 and A2 are reset to 0.0.
Press the button
briefly. Next display mode