KTM 1290 SUPER DUKE R 2021, Руководство пользователя

Страница: 67 / 188

ERGONOMICS 8
65
Guideline
Screw, step
plate for foot
brake lever M6 10 Nm (7.4 lbf ft)
Loctite ® 243™
8.6 Checking the basic position of the shift lever
Info
When driving, the shift lever must not touch the rider's boot when in the basic position.
If the shift lever is permanently touching the boot, the transmission will be subject to excessive load; this
can cause a malfunction of the quickshifter.
400692-10
–
Sit on the vehicle in the riding position and determine
distance
A between the upper edge of your boot and the shift
lever.
Distance between shift lever
and upper edge of boot 10 … 20 mm (0.39 …
0.79 in)
» If the distance does not meet specifications:
–
Adjust the basic position of the shift lever.
(
p. 65)
8.7 Adjusting the basic position of the shift lever
S03895-10
(SUPER DUKE R)
–
Loosen nut
1
while holding stud
2
.
Info
Nut
1
has an LH thread.
–
Loosen nut
3
while holding stud
2
.
–
Turn stud
2
to adjust the shift lever.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any
other vehicle components during the shift proce-
dure.
The shift linkage must be correctly adjusted in both
footrest positions to ensure correct functioning of
the shift mechanism.
–
Tighten nut
3
while holding stud
2
.
Guideline
Nut, shift rod M8 12 Nm (8.9 lbf ft)
–
Tighten nut
1
while holding stud
2
.
Guideline
Nut, shift rod M8LH 12 Nm (8.9 lbf ft)