KTM 1290 SUPER DUKE R 2021, Руководство пользователя

Страница: 113 / 188

SERVICE WORK ON THE CHASSIS 13
111
» If the chain tension does not meet the specification:
–
Adjust the chain tension. ( p. 111)
H00380-11
–
Check protection caps
1
for damage and tightness.
» If the protection caps are damaged or loose:
–
Replace the protection caps.
Link fork protection cap (61304041100)
Finishing work
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 99)
13.19 Adjusting the chain tension
Warning
Danger of accidents Incorrect chain tension damages components and results in accidents.
If the chain is tensioned too much, the chain, engine sprocket, rear sprocket, transmission and rear
wheel bearings wear more quickly. Some components may break if overloaded.
If the chain is too loose, the chain may fall off the engine sprocket or the rear sprocket. As a result, the
rear wheel locks or the engine will be damaged.
–
Check the chain tension regularly.
–
Set the chain tension in accordance with the specification.
Preparatory work
–
Lift the motorcycle with the rear lifting gear. ( p. 99)
–
Check the chain tension. ( p. 110)
S03919-10
Main work
–
Loosen screw
1
.
–
Set the chain tension by turning the hub housing.
Holding wrench (61329085000)
Handle for holding wrench (60012060000)
Info
Turn clockwise to increase the chain tension; turn
counterclockwise to reduce the chain tension.
The tool required is in the tool set.
–
Check the chain tension. ( p. 110)
The chain tension matches the specified value.
Info
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
–
Tighten screw
1
.