KTM 1290 SUPER DUKE R 2021, Руководство пользователя

Страница: 127 / 188

WHEELS, TIRES 15
125
S03928-11
(SUPER DUKE RR)
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease shaft seal rings 1 and contact sur-
faces
A
of the spacers.
Long-life grease ( p. 177)
S03929-10
–
Insert wide spacer
2
on the left in the direction of travel.
Info
Arrow
B
indicates the direction of travel of the
front wheel.
The wheel speed sensor wheel is on the left viewed
in the direction of travel.
–
Insert the narrow spacer on the right in the direction of
travel.
S04803-10
Warning
Danger of accidents Oil or grease on the brake
discs reduces the braking effect.
–
Always keep the brake discs free of oil and
grease.
–
Clean the brake discs with brake cleaner when
necessary.
–
Clean screw
3
and wheel spindle
4
.
–
Grease wheel spindle
4
lightly.
Long-life grease ( p. 177)
–
Jack up the front wheel into the fork, position it, and insert
the wheel spindle.
–
Mount and tighten screw
3
.
Guideline
Screw, front
wheel spindle M25x1.5 45 Nm (33.2 lbf ft)
Thread greased
S04801-11
–
Position brake calipers and check that the brake linings are
seated correctly.
–
Mount screws
5
on both brake calipers, but do not
tighten yet.
–
Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pres-
sure point. Secure the hand brake lever in the activated
position.
The brake calipers straighten.
–
Tighten screws
5
on both brake calipers.