KTM 125 EXC EU 2010, Руководство пользователя

Страница: 83 / 140

MAINTENANCE WORK ON CHASSIS AND ENGINE
81
11.91
Installing the glass fiber yarn filling of the main silencer
x
0 0 3 3
0 0 4 4
0 0 2 2
0 0 1 1
B00074-10
–
Slide the glass fiber yarn filling

over the inner tube.
–
Slide the outer tube

over the glass fiber yarn filling.
Info
Ensure that the O-rings are seated properly.
–
Insert locking cap

into the outer tube.
–
Mount and tighten nut

.
–
Install the main silencer. ( p. 80)
11.92
Changing the glass fiber yarn filling of the main silencer
x
B00063-00
–
Remove the glass fiber yarn filling of the main silencer.
x
( p. 80)
–
Install the glass fiber yarn filling of the main silencer.
x
( p. 81)
11.93
Removing the air filter box lid
B00038-10
–
Pull off the air filter box lid in area

sideways and remove it toward the front.
11.94
Installing the air filter box lid
B00038-11
–
Insert the air filter box lid into the rear area

and clip it into the front area

.
11.95
Removing the air filter
x
Note
Engine failure Unfiltered intake air has a negative effect on the service life of the engine.
–
Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
–
Remove the air filter box lid. ( p. 81)