KTM 125 Duke 2016, Инструкции по установке

Страница: 9 / 17

3 WORK
7
Info
Even when there is no load on the battery, it discharges steadily.
The charging level and the method of charging are very important for the service life of the battery.
Rapid recharging with a high charging current shortens the service life of the battery.
If the charging current, charging voltage, and charging time are exceeded, the battery will be destroyed.
If the battery is depleted from starting the vehicle repeatedly, the battery must be charged immediately.
If the battery is left in a discharged state for an extended period, it will become over-discharged and sulfated, destroying the
battery.
The battery is maintenance-free, i.e., the acid level does not have to be checked.
Preparatory work
–
Remove the passenger seat. ( p. 5)
–
Remove the seat. ( p. 5)
–
Disconnect the negative cable of the battery.
311910-10
Main work
–
Connect the battery charger to the battery. Set the battery charger.
Alternative 1
Battery charger XCharge-professional EU (00029095050)
Alternative 2
Battery charger XCharge-professional US (00029095051)
Alternative 3
Battery charger XCharge-professional GB (00029095052)
Alternative 4
Battery charger XCharge-professional CH (00029095053)
Info
Follow the instructions of the charger and the manual.
–
Disconnect the battery charger after charging the battery.
Guideline
The charging current, charging voltage, and charging time must not be exceeded.
Charge the battery regularly when the
motorcycle is not in use
3 months
Finishing work
–
Mount the seat. ( p. 5)
–
Mount the passenger seat. ( p. 5)
–
Set the clock. ( p. 10)
3.7 Installing the battery
B00751-11
Main work
–
Position the battery in the battery holder.
Guideline
The terminals of the battery must face upwards.
(125 Duke)
Battery (FTZ-7)
(200 Duke)
Battery (FTZ-9)
–
Reconnect rubber band  .
–
Position the positive cable

and mount and tighten the screw.
–
Position positive terminal cover

.