KTM 125 Duke 2016, Инструкции по установке

Страница: 7 / 17

3 WORK
5
3.1 Removing the passenger seat
B00712-01
–
Insert the ignition key in seat lock

and turn it clockwise.
–
Raise the rear of the seat, push it towards the rear, and remove it upwards.
–
Remove the ignition key from the seat lock.
3.2 Mounting the passenger seat
B00724-10
–
Attach hooks

on the passenger seat to brackets

on the subframe, and lower
it at the rear while pushing forward.
–
Press down the passenger seat until it clicks into place.
Warning
Danger of accidents The passenger seat can come loose from the anchoring
if it is not mounted correctly.
–
After mounting the passenger seat, check that it is locked correctly by
pulling up.
–
Finally, check that the passenger seat is correctly mounted.
3.3 Removing the seat
Preparatory work
–
Remove the passenger seat. ( p. 5)
B00725-10
Main work
–
Remove screws

.
–
Raise the rear of the seat, pull it towards the rear, and remove it upwards.
3.4 Mounting the seat
B00727-10
Main work
–
Attach seat recesses

at screws

and lower at the rear.
–
Mount and tighten screws

.
Guideline
Screw, seat M6 10 Nm (7.4 lbf ft)