User Manual for OMNI-IP Network Cameras
63
Steps:
1.
Enter the Exception Settings interface:
Configuration > Advanced Configuration> Events > Exception
2.
Check the checkbox to set the actions taken for the Exception alarm. Refer to
Task 3
Set the Alarm Actions Taken for Motion Detection
in
Section 6.6.1.
Figure 5-43
Exception Settings
3.
Click
Save
to save the settings.
5.6.6
Configuring Line Crossing Detection
Video Content Analysis for Line Crossing is more than just motion detection. It is
recognition of specific motion in a specific direction across a specific demarcation.
This function can be used for detecting people, vehicles and objects crossing a
pre-defined boundary. The line crossing direction can be set as bidirectional, from left
to right or from right to left. The camera and NVR can enable a linkage between VCA
alarms and other actions when detecting exceptional events, such as people, vehicles
and objects crossing a virtual line.
Steps:
1.
Check the
Enable Line Crossing Detection
checkbox.
2.
Click the
Draw Area
, and a crossing plane will show on the image.
3.
Click on the line, and you will see two red squares on each end, drag each of
these red squares to define the arming line. Once the line has been defined,
clicking on the ‘Draw Area’ button allows the line to be repositioned. “Clear”
will erase the line. Only one line per camera is allowed.