User Manual for OMNI-IP Network Cameras
47
(no IR), night (IR on) or scheduled.
Figure 5-26
Day/Night Switch
Day, night, auto and schedule are selectable for day/night switch.
Day:
the camera stays at day mode.
Night:
the camera stays at night mode.
Auto:
the camera switches between the day mode and the night mode according to the
illumination automatically. The sensitivity ranges from 0~7, the higher the value is,
the easier the mode switches. The filtering time refers to the interval time between the
day/night switch. You can set it from 5s to 120s.
Schedule:
Set the start time and the end time to define the duration for day/night
mode.
Smart IR
gives user an option to turn ON / OFF the Smart IR LED function.
Set the smart IR to
ON
, and the IR LED changes according to the actual scene
luminance. E.g.: if the current scene is bright enough, then the IR LED adjusts itself
to lower power; and if the scene is not bright enough, the IR LED adjusts itself to
higher power.
Select Off, and the IR LEDs are at their highest power.
Backlight Settings
BLC
: If you focus on an object against strong backlight, the object will be too dark to
be seen clearly. BLC compensates light to the object in the front to make it clear. OFF,
Up, Down, Left, Right, Center and customize are selectable.
WDR
: Wide Dynamic Range can be used when there is a high contrast between the
bright areas and the dark areas in the scene.
HLC
: High Light Compression function can be used when there are strong lights in