User Manual for OMNI-IP Network Cameras
52
1.
Enter the Privacy Mask Settings interface:
Configuration > Advanced Configuration> Image > Privacy Mask
2.
Check the checkbox of
Enable Privacy Mask
to enable this function.
3.
Click
Draw Area
.
Figure 5-32
Privacy Mask Settings
4.
Click and drag the mouse in the live video window to draw the mask area.
Note:
You are allowed to draw up to 4 areas on the same image.
5.
Click
Stop Drawing
to finish drawing or click
Clear All
to clear all of the areas
you set without saving them.
6.
Click
Save
to save the settings.
5.6
Configuring and Handling Alarms
This section explains how to configure the network camera to respond to alarm events,
including motion detection, video tampering, alarm input, alarm output, exception, etc.
These events can trigger the alarm actions, such as Notify Surveillance Center, Send
Email, Trigger Alarm Output, etc.
Notes:
Check the checkbox of Notify Surveillance Center if you want to the alarm
information pushed to your mobile phone as soon as the alarm is triggered.
