13
Operating Manual ECOTROC ATCN 15-110
6. Transport, storage and setup
6.1 Transport
Although great care is taken, please check immediately whether the adsorber has been damaged in any way.
Any kind of transportation damage must be pointed out immediately to the deliverer and manufacturer.
•
Suitable hoisting equipment must be provided for the transportation, loading and unloading process.
•
The device must only be lifted at the designated points: crane hook or transport pallet.
•
Take the weight of the adsorber into account and provide suitable assistive equipment.
•
Secure the adsorber against tilting using suitable means.
•
Do not remove the packaging material until the device is
moved to its place of installation.
•
Only appropriately qualified personnel may carry out the
abovementioned tasks.
•
Observe all regulations on accident prevention.
6.2 Storage
If the device needs to be stored before being commissioned, ensure that the storage site ful-
fills the following requirements:
•
indoors only
•
dry
•
frost-free
•
protected against weather impact.
If the device is stored after having been commissioned, please proceed as follows:
•
Depressurise the adsorber.
•
Disconnect the adsorber from the compressed air system.
•
Close the compressed air inlet and outlet.
Lifting lug
