KSH International CO., LTD.
23
Field Description
□
□
□
System time elapsed
The time elapsed since start of this device in [Day Hour : Minute : Second]
format. This information can be useful in identifying the reliability of system.
□
□
□
Firmware version
Converter firmware is identified by date code. This information will be
required in looking for technical support.
□
□
□
Serial number
Converter is consisted “Type Number (5 digits) and an unique MAC (Media
Access Control) address used by Ethernet in octad format, 8 digits.
□
□
□
Password(Setup Login)
This field is the administration password for authentication. Factory default is
“
empty
”. However, it is not recommended to leave it empty in field operation.
If you could not login, it means you have to key in the password. If you do not
know the password you can turn off the power and then use any point tip to
push “Reset” button and hold it to turn on the power at the same time for
5
seconds.
The password will be reset to the factory default as
“empty”.
e-Net TCP/IP converter uses the same password protection mechanism
commonly used in Windows NT or UNIX. If there are more than
“3
consecutive failures”
in password check during login, the login function will
be disabled for
“15 minutes”
. During this 15 minutes period, even if you
supply correct password, login will not proceed. This prevents intruders from
finding the password by computer generated program.
