KSB KWT51, Инструкция по установке и эксплуатации

Страница: 10 / 30

3 Transport/Storage/Disposal
10 of 30
KWT51
1974.95/01-EN
CAUTION
Wet, contaminated or damaged openings and connections
Damage to the KSB quench system!
▷
Only open the screw plugs and connections of the KSB quench system during
installation.
▷
Avoid opening screw plugs and connections before that time.
Store the KSB quench system in its original packaging, placed on a level surface in a
dry, protected room in which the following conditions are consistent:
▪
Relative humidity < 65 %
▪
Temperature between 15 °C and 25 °C
▪ Moderately vented atmosphere
▪ Dust-free and vermin-free
New KSB quench systems are supplied by our factory duly prepared for storage.
3.4 Return to supplier
1. Prior to returning the product to the supplier, flush and clean it, particularly if it
has been used in noxious, explosive, hot or other hazardous fluids.
2. If the product has been used in fluids whose residues could lead to corrosion
damage in the presence of atmospheric humidity or could ignite upon contact
with oxygen, the product must also be neutralised and treated with anhydrous
inert gas to ensure drying.
3. Always complete and enclose a certificate of decontamination when returning
the product. ( ð Section 10, Page 27)
Indicate any safety measures and decontamination measures taken.
NOTE
If required, a blank certificate of decontamination can be downloaded from the
following web site:
www.ksb.com/certificate_of_decontamination
3.5 Disposal
WARNING
Fluids, consumables and supplies posing a health hazard
Hazard to persons and the environment!
▷ Collect and dispose of any preservatives, flushing liquids and fluid residues.
▷
Wear safety clothing and a protective mask, if required.
▷ Observe all legal regulations on the disposal of fluids posing a health hazard.
1. Dismantle the product.
Collect greases and other lubricants during dismantling.
2. Separate and sort the materials, e.g. by:
- Metals
- Plastics
- Electronic waste
- Greases and other lubricants
3. Dispose of materials in accordance with local regulations or in another
controlled manner.