KSB Hyamat SVP Eco, Инструкция по установке и эксплуатации

Страница: 35 / 68

7 Operation
35 of 68
Hyamat SVP Eco
7 Parameter number for output frequency (1-2-1-7)
8 Current output frequency in Hz
If a message (alert, warning or information) is currently active, it will be displayed on
the main screen.
AUTO
1/min
Fig. 10: Message display
A message is identified by the letter E (Error) and a unique number (see list of all
messages in the Annex). The traffic light function shows whether the message is an
alert (red LED), a warning (amber LED) or just information (green LED).
Messages are acknowledged by pressing OK. Acknowledged and gone messages are
listed in the message history in Menu 2 – Diagnosis.
NOTE
If the motor standstill heater has been switched on, the display alternates between
the measured value and the letter H.
7.1.1.3 Settings menu
NOTE
The standard control panel is designed to be used for simple settings only (e.g.
setting the setpoint). We recommend using the KSB ServiceTool for more extensive
configuration tasks.
Opening the Settings menu: Press and hold the ESC key and press OK.
AUTO
ESC
OK ESC +
AUTO
1/min
1 2
Fig. 11: Switch to the settings menu
1 Main screen 2 Settings menu
The wrench icon indicates that the settings menu is called up and a value can be
edited.
The parameter numbers identify the navigation path, which helps you find a
particular parameter quickly and easily. The first digit of the parameter number
indicates the first menu level, which is called up directly via the four menu keys.