KSB Hyamat SVP Eco, Инструкция по установке и эксплуатации

Страница: 11 / 68

3 Transport/Temporary Storage/Disposal
11 of 68
Hyamat SVP Eco
3 Transport/Temporary Storage/Disposal
3.1 Checking the condition upon delivery
1. On transfer of goods, check each packaging unit for damage.
2. In the event of in-transit damage, assess the exact damage, document it and
notify KSB or the supplying dealer and the insurer about the damage in writing
immediately.
3.2 Transport
DANGER
Pressure booster system tipping over
Risk of injury by falling pressure booster system!
▷ Never suspend the pressure booster system by its power cable.
▷
Observe the applicable local accident prevention regulations.
▷ Observe the information on weights, centre of gravity and fastening points.
▷ Use suitable and permitted transport equipment, e.g. crane, forklift or pallet
truck.
▷ To transport the pressure booster system, suspend it from the lifting tackle as
illustrated.
Movitec 2, 4, 6, 10, 15 Movitec 25, 40, 60, 90
Fig. 1: Attaching the lifting equipment to the system and transporting the system
ü Transport equipment/lifting equipment suitable for the corresponding weight
has been selected and is available.
1. Remove the packaging. Remove the caps from the connection openings.
2. Check for any in-transit damage.
3. Transport the pressure booster system to the place of installation.
4. Detach the pressure booster system from the pallet using a suitable tool.
5. Attach the pressure booster system to the lifting equipment as illustrated.
6. Lift it off the wooden skids. Dispose of the wooden skids.
7. Carefully place down the pressure booster system at the site of installation.