2 Safety
8 of 36
AmaRoc
2.4 Personnel qualification and personnel training
All personnel involved must be fully qualified to install, operate, maintain and
inspect the product this manual refers to.
The responsibilities, competence and supervision of all personnel involved in
transport, installation, operation, maintenance and inspection must be clearly
defined by the operator.
Deficits in knowledge must be rectified by means of training and instruction
provided by sufficiently trained specialist personnel. If required, the operator can
commission the manufacturer/supplier to train the personnel.
Training must always be supervised by technical specialist personnel.
2.5 Consequences and risks caused by non-compliance with these operating
instructions
▪
Non-compliance with these operating instructions will lead to forfeiture of
warranty cover and of any and all rights to claims for damages.
▪
Non-compliance can, for example, have the following consequences:
–
Hazards to persons due to electrical, thermal, mechanical and chemical
effects and explosions
–
Failure of important product functions
–
Failure of prescribed maintenance and servicing practices
–
Hazard to the environment due to leakage of hazardous substances
2.6 Safety awareness
In addition to the safety information contained in this manual and the intended use,
the following safety regulations shall be complied with:
▪
Accident prevention, health regulations and safety regulations
▪
Explosion protection regulations
▪
Safety regulations for handling hazardous substances
▪
Applicable standards, directives and laws
2.7 Unauthorized modes of operation
Never operate the submersible mixer stand outside the limits stated in the data sheet
and in this installation and operating manual.
The warranty relating to the operating reliability and safety of the submersible mixer
stand supplied is only valid if the stand is used in accordance with its intended use.
