5 Installation at Site
20 of 36
AmaRoc
5.
Lock the square guide rail in place so that it cannot be pulled out. To this end,
drill a hole into the submersible mixer stand and the square guide rail, using a
metal drill bit Ø
3
/
8
" [10 mm]. Position the hole as indicated by the marking on
the submersible mixer stand.
6.
Insert the locking pin to lock the square guide rail in place.
Free-standing model: Provisionally use the eyebolt and a washer to lock the pin
(a).
Models installed with an upper holder: Use the hexagon head bolt
5
/
8
x
1
3
/
16
" [M16x30] and washer to lock the pin (b).
