24
Movitec V 2,4,6,10,15 & 90
11
Annexes
11.1
CE declaration of conformity
KSB
ICS. B.V
Kalkovenweg 13
2401 LJ Alphen aan den Rijn, The Netherlands
Hereby declares as manufacturer entirely on his own responsibility, that the products:
Vertical High pressure in-line pumps, series: Movitec V B
The pump is subject to this declaration of conformity as a stand alone product.
Make sure the appliance or installation in which the pump is built in, has got a declaration of compliance with the
directives listed above, for its complete assembly.
Alphen aan den Rijn
02-01-2010
Authorized representative
W. Ouwehand, technical director.
Serial number: 01/2010 700000 - 52/2014 999999
In case the pump is delivered without motor:
IIB
to which this declaration refers, is in accordance with the following standard:
EN 809:1998+A1:1998
according to the
provisions of the harmonized norm for pumps and which implies the regulations of
Machine directive 2006/42/EC
in
the most recent form
In case the pump is delivered with an electromotor:
IIA
to which this declaration refers, is in accordance with the following standard:
EN 809:1998+A1:1998
according to the
provisions of the harmonized norm for pumps and which implies the regulations of
Machine directive 2006/42/EC,
EMC 2004/108/EC and Low voltage directive 2006/95/EC
in the most recent form
In case the pump is delivered with an ATEX classified motor:
IIA
to which this declaration refers, is in accordance with the following standard:
EN 809:1998+A1:2009
according to the
provisions of the harmonized norm for pumps and which implies the regulations of
Machine directive 2006/42/EC,
EMC 2004/108/EC and Low voltage directive 2006/95/EC
in the most recent form. The pump also complies with the
ATEX directive as filed under number:171784 / KSB rev.1 Lloyd’s Register ATEX 2004
Goodnal STP ST041 Disinfection & Outfall (KSB ATF Feed Pump Skid PU-0700-110
Q-Pulse Id VM405
Active 29/10/2013
Page 26 of 41
