10
Movitec V 2,4,6,10,15 & 90
5
Pump Introduction
5.1
Model key
Table 4: Model key Example Movitec VSF90/3-1 B
5.2
Description of the product
The vertical, single or multi stage centrifugal pump
series are designed for pumping clean, or lightly
aggressive, watery mediums.
Suction and discharge of the pump are in-line,
making the pump easy to install.
The hydraulic assembly is driven by an electric motor.
All hydraulic parts of the pump are made of stainless
steel.
5.3
Modular selection
To suit almost every application the pump is
assembled out of modules which can be selected
depending on the required working range.
Basic modules are:
•
Basic pump
model,
which defines the capacity,
pressure and basic material
•
Connections,
which define the suction and
discharge connection as well as the base plate.
•
Sealings,
which define the elastomers, the
mechanical seal and the shaft seal type.
•
Electric motor,
which defines all requirements
of the motor such as motor size, power, voltage,
frequency and all possible motor accessories.
Movitec VS
F
90 /3 -1 B
Label
Movitec Product
Label
Material/Con-
struction
VC
Cast Iron pump foot and top bracket hydr. 1.4301 / AISI 304
V
All wetted parts Stainless Steel 1.4301 / AISI 304
VM
All wetted parts Stainless Steel 1.4301 / AISI 304 with closed coupled
motor
VS
All wetted parts Stainless Steel 1.4401 / AISI 316
Connections
E
Male thread (with non-return valve insert)
Oval flange with female thread
F
Round flange
V
Victaulic connections
T
Tri-clamp connections
90
Capacity in m
3
/h at Q.
opt
.
/3
Number of stages
/3 -1
Number of stages of which one stage with reduced head
B
Design version
Goodnal STP ST041 Disinfection & Outfall (KSB ATF Feed Pump Skid PU-0700-110
Q-Pulse Id VM405
Active 29/10/2013
Page 12 of 41
