Krups ESPRESSO AUTOMATIC EA85 Series, Руководство пользователя

Страница: 10 / 116

12
The grinding setting is useful when you change coffee type or if you would like a stronger or
weaker coffee. It is not recommended that you perform this setting systematically.
Preparing drinks: Espresso
This chapter explains how the appliance operates using the example of the Espresso function.
Press the “
Espresso ” button.
If the appliance detects a lack of water when you request a recipe, it will ask you to fill the tank.
Place the cup(s) under the coffee spouts.
You can adjust the height of the coffee outlet depending on the size of your cup(s).
Fig. 10.
Possible settings
The appliance lets you prepare one or two cups.
Selecting the strength: the more beans selected the coarser the preparation. You can change
the strength using the
– and + buttons located to the left and right of the symbols. Press the
“ OK ” button on the touch screen to launch the preparation.
Preparing an espresso
The appliance grinds the beans, compacts the coffee grounds and performs percolation.
It is possible to adjust the volume of coffee in preparation using the
- and + buttons.
You can stop the preparation at any time by pressing “ STOP ”. Caution, pressing stop causes
an appliance resetting phase that can last up to 30 seconds. This is normal.
When a cycle is interrupted, the appliance does not stop immediately, the appliance will finish
its cycle but the preparation will be cancelled.
Caution! : Automatic rinsing of the coffee nozzle
Depending on the type of recipes prepared, the appliance may carry out an automatic
rinsing operation when it is switched off.
The cycle lasts only a few seconds and will stop automatically.
Preparing other drinks: cappuccino / latte
THE "ONE TOUCH CAPPUCCINO" BLOCK
This "One Touch Cappuccino" block facilitates preparation of a cappuccino or a caffè latte.
- Preparing your appliance:
Connect the milk suction pipe on the left to the "One Touch Cappuccino" block. Place the other
end in a container filled with milk
Fig. 11 .
Position your cup and set the button on the block to the desired position: cappuccino or
latte Fig. 12.
- Settings and making drinks
Press the "Cappuccino Latte" button.
All settings can be modified.
For each cappuccino, the machine will take into account the last recipe used.
Once the settings have been defined, press
OK .
The steam is used to froth up the milk. As the production of steam requires a high temperature,
the appliance has an additional pre-heating phase.
The following stages are automatically sequenced: frothing of the milk, grinding of the coffee
and preparation of the coffee.
Your drink is ready for you to enjoy
Fig. 13 .
!
IFU_KR_EA85_EE_0A17616_EA85 09/09/13 17:50 Page12