20
Krowne Metal Corporation
|
100 Haul Road
|
Wayne, NJ 07470
Phone: (800) 631-0442
|
Fax: (973) 872-1129
|
www.krowne.com
Maintenance
Maintenance Schedule
Daily Maintenance
1.
Make sure that the water supply is on and that the drain is not clogged.
2.
Check the temperature gauge and ensure it is operating.
3.
Make sure that dish racks are in good condition.
4.
Check the chemical containers and refill as required.
5.
Follow the cleaning procedures given above.
Weekly Maintenance
1.
Perform Steps 1-5 in the Daily Maintenance.
2.
Inspect water lines for leaks.
3.
Check for water leaks underneath the glasswasher.
4.
Make sure the flexible water fill and drain hoses are not kinked.
5.
Make sure that the glasswasher is level.
6.
Clean accumulated lime deposits from the wash tank heating element.
7.
Inspect the scrap screen and replace it if damaged.
8.
Check the spray arm and replace or repair if damaged.
Monthly Maintenance
1.
Perform the Daily and Weekly Maintenance listed above.
2.
Clean the chemical dispenser pick-up tubing by flushing with hot water.
To clean the pick-up tubing:
1.
Remove the pick-up tubes from their containers.
2.
Place each tube in a separate container of hot water.
3.
Press and hold the PRIME button up in the DET position until water flows into the wash tank
compartment.
4.
Press and hold the PRIME button down in the SAN position for 3 minutes.
5.
Press and hold the PRIME button up in the R/A position for 3 minutes.
6.
Return the pick-up tubes to their containers.
7.
Run 3 empty glasswasher cycles to flush any chemicals from the glasswasher
wash compartment.
Follow the maintenance schedules below to keep the glasswasher operating most efficiently.
Содержание GWD-24
Страница 48: ......
