Krowne GWD-24, Инструкция по установке и эксплуатации

Страница: 16 / 48

16
Krowne Metal Corporation | 100 Haul Road | Wayne, NJ 07470
Phone: (800) 631-0442 | Fax: (973) 872-1129 | www.krowne.com
The best preventative maintenance is keeping the glasswasher as clean as possible
during regular use. A regular cleaning schedule will increase the life of the glasswasher
and ensure the best washing results.
CAUTION:
Damage to the unit or improper operation may occur if components are not
flushed and cleaned on a regularly scheduled basis.
After Each Meal Period or Every 8 hours of Operation
1.
Remove the scrap screen and flush with clean water. Be sure to backflush the screen.
2. Inspect the sump and pump intake screen and clean as required.
3.
Reassemble the machine and return to normal operation.
Daily-End of the Day
1.
Push the POWER switch to the OFF/DRAIN position and close the door to drain the tank.
The green in-cycle light will illuminate indicating the machine is in the drain cycle.
2. After the green in-cycle light goes out, open the door and remove the lower spray arm.
3.
Backflush the spray arm with clean water to remove any debris from the spray nozzles.
Do not strike the spray arm against solid objects
Cleaning
Cleaning
Nozzles
Bearing