15
Krowne Metal Corporation
|
100 Haul Road
|
Wayne, NJ 07470
Phone: (800) 631-0442
|
Fax: (973) 872-1129
|
www.krowne.com
Operation
Operation
1.
Push the glasswasher POWER switch up to the ON position.
2.
The POWER switch illuminates and the machine fills with water.
3.
Press and hold the green START button for 1 second.
4.
Release the START switch.
5.
The glasswasher starts and the green cycle light illuminates.
6.
Check the temperature gauge to confirm that it displays the correct incoming hot water
temperature. This may take several minutes for the wash tank to reach temperature.
7.
When the glasswasher stops, push the POWER switch down to the OFF/DRAIN position.
8.
After a 4 second pause, the green cycle light will illuminate, the machine will drain, fill with water;
and perform 3 short cycles and then drain completely.
9.
The green cycle light goes out when the machine has drained completely.
Drain Mode
Содержание GWD-24
Страница 48: ......