Kronoterm HM-130 S1 Скачать руководство пользователя страница 11

Страница: 11 / 60

2.1 Controlling the device and heating system

Use the device and heating system in accordance with this manual and instructions for use

of the heat pump which explains the use off the device and heating system.

2.2 Maintaining the device and heating system

The device must be visually inspected once a year. The electrical and hardware installation

of the device have to be inspected. In the case of detected irregularities, contact the

authorised technician.

CAUTION

The servicing and maintenance of the device can only be performed by a person
authorised by the manufacturer. In case of a malfunction, first contact the installer
who installed the device.

NOTE

Cleaning of water filters on the return into the device is advised to be performed at

least once yearly.

CAUTION

A blocked water purifying component and magnetic filter can lead to a malfunction

of the device or incorrect functioning of the device. In case the display displays a

warning of flow malfunction (

”Caution, flow!”).

NOTE

Periodically, once yearly, check the water temperature in the heating system.

NOTE

In case the pressure falls (i.e. Leakage of the system) the display displays a

warning of flow malfunction (

”Caution, flow!”).

2.2.1 OPERATION MALFUNCTIONS

In case of a malfunction during the operation of the device, the display of the

TERMOTRONIC controller displays the warning

“Caution, malfunction”.

Find the malfunction description in the

“Owner’s manual”. For error correction call the

installer who installed the device.

2.2.1.1 Resetting the thermal protection of the built-in electrical

heater

The thermal protection of the electrical heater is an additional safeguard protecting the

device in the following cases:

Содержание HM-130 S1





























































Результаты поиска

Содержание HM-130 S1

Отзывы:

Похожие инструкции для HM-130 S1

Бренды по названию

Популярные бренды

Kronoterm HM-130 S1, Инструкция по установке, использованию и техническому обслуживанию

Результаты поиска

Содержание HM-130 S1

Отзывы:

Похожие инструкции для HM-130 S1

Бренды по названию

Популярные бренды